Chuckle Brothers at Work

Another hour each in the garage this afternoon, which saw the rest of the nosecone fitting

We enlarged the slightly off location hole in the right general direction, and then drilled out the final nosecone fixing hole - which by a combination of guess work and measuring (and luck) seems to be in the right place.



As you can see from the following photos, it looks ok-ish with the bonnet on too.

Though in fact the bonnet and nosecone don't line up - the bonnet sticks out further than the nosecone where they both rest on the body.

We are hoping that when we put the pins and grommets in that join the two that will pull them back into line. However we need an 18mm hole saw, and we don't have one, so that will be for ebay to solve in the week.

If we both get some school/office work done now, we might get out again later to start on the front indicator fixing.


















Pictures - Copyright (c) Anna Pearson 2006